Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS EMERGE™ PC/ABS 7380 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7380 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm,注塑 | ASTM D256 | 730 J/m |
| Mechanical properties | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7380 |
|---|---|---|---|
| elongation | 断裂,3.20mm,注塑 | ASTM D638 | 130 % |
| bending strength | 3.20mm,注塑 | ASTM D790 | 87.0 MPa |
| tensile strength | 屈服,3.20mm,注塑 | ASTM D638 | 54.0 MPa |
| Flexural modulus | 3.20mm,注塑 | ASTM D790 | 2600 MPa |
| flammability | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7380 |
|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL 94 | HB |
| 3.2mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7380 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.40to0.60 % |
| melt mass-flow rate | 260°C/5.0kg | ASTM D1238 | 24 g/10min |
| 230°C/3.8kg | ASTM D1238 | 4.0 g/10min | |
| density | ASTM D792 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7380 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 105 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 120 °C | |
| RTI Imp | UL 746 | 60.0 °C | |
| RTI | UL 746 | 60.0 °C | |
| RTI Elec | UL 746 | 60.0 °C |
Contact Us
Get App
Top