Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC PBT/PC 18 FR V0 Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 17 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 14 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| dielectric strength | IEC 60243-1 | 25 kV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+17 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 3.10 |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.015 |
| Mechanical properties | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2/5 | 9.0 % |
| tensile strength | 断裂,23°C | ISO 527-2/5 | 57.0 MPa |
| Nominal tensile fracture strain | 23°C | ISO 527-2/50 | 4.0 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 2600 MPa |
| flammability | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.32 g/cm³ |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.090 % |
| 饱和,23°C | ISO 62 | 0.21 % |
| Thermal performance | Test Condition | Test Method | Bada AG/ PBT/PC 18 FR V0 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD | DIN 53752 | 1E-04 cm/cm/°C |
| maximum service temperature | 20000h | IEC 216 | 110 °C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 125 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 110 °C | |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 9E-05 cm/cm/°C |
| maximum service temperature | somehours | 130 °C | |
| melting temperature | ISO 3146 | 223 °C |
Contact Us
Get App
Top