Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA HTN FR55G50NHLW BK046 DUPONT SHENZHEN
Zytel®
Thin walled products、container、chip
High temperature resistan、Flame retardant、Filler: Glass fiber reinf、50% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DUPONT SHENZHEN/HTN FR55G50NHLW BK046 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 50 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DUPONT SHENZHEN/HTN FR55G50NHLW BK046 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 17500 Mpa | |
| bending strength | ISO 178 | 306 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 1.6 % |
| Flexural modulus | ISO 178 | 16600 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 195 Mpa |
| flammability | Test Condition | Test Method | DUPONT SHENZHEN/HTN FR55G50NHLW BK046 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| 0.75mm | IEC 60695-11-10,-20 | V-0 | |
| 1.5mm | IEC 60695-11-10,-20 | V-0 | |
| FMVSS flammability | FMVSS302 | B | |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| burning rate | 1.00mm | ISO 3795 | <100 mm/min |
| physical property | Test Condition | Test Method | DUPONT SHENZHEN/HTN FR55G50NHLW BK046 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.20 % |
| MD | ISO 294-4 | 0.10 % |
| Thermal performance | Test Condition | Test Method | DUPONT SHENZHEN/HTN FR55G50NHLW BK046 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：55to160°C | ISO 11359-2 | 1.1E-05 cm/cm/°C |
| RTI Str | 0.75mm | UL 746 | 65.0 °C |
| RTI Imp | 1.5mm | UL 746 | 65.0 °C |
| RTI Elec | 0.40mm | UL 746 | 65.0 °C |
| 3.0mm | UL 746 | 65.0 °C | |
| RTI Imp | 3.0mm | UL 746 | 65.0 °C |
| RTI Elec | 0.75mm | UL 746 | 65.0 °C |
| melting temperature | ISO 11357-3 | 298 °C | |
| Linear coefficient of thermal expansion | TD：-- | ISO 11359-2 | 3.8E-05 cm/cm/°C |
| RTI Imp | 0.40mm | UL 746 | 65.0 °C |
| 0.75mm | UL 746 | 65.0 °C | |
| Linear coefficient of thermal expansion | MD：-40to23°C | ISO 11359-2 | 1.4E-05 cm/cm/°C |
| TD：-40to23°C | ISO 11359-2 | 3.6E-05 cm/cm/°C | |
| MD：-- | ISO 11359-2 | 1.2E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 215 °C |
| RTI Str | 1.5mm | UL 746 | 65.0 °C |
| 3.0mm | UL 746 | 65.0 °C | |
| RTI Elec | 1.5mm | UL 746 | 65.0 °C |
| RTI Str | 0.40mm | UL 746 | 65.0 °C |
Contact Us
Get App
Top