Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Polifor® 7000/V0-AF-EP NATURALE SO.F.TER ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 2.2 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 35 J/m |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 45 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 5.0 % |
| Flexural modulus | ASTM D790 | 1900 MPa | |
| tensile strength | 屈服 | ASTM D638 | 20.0 MPa |
| Electrical performance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| needle flame test | IEC 60695-11-5 | Pass |
| flammability | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 775 °C | |
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 1.4 % | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 18 g/10min |
| density | ASTM D792 | 1.06 g/cm³ |
| Thermal performance | Test Condition | Test Method | SO.F.TER ITALY/Polifor® 7000/V0-AF-EP NATURALE |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 65.0 °C |
| vicat | ASTM D15252 | 78.0 °C |
Contact Us
Get App
Top