Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS 6165A7 JAPAN POLYPLASTIC
DURAFIDE®
Fiber grade
Dimensional stability,Flame retardant,Glass fiber reinforced,High temperature resistan,Fuel resistant,Filler: Glass mineral,65% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 |
|---|---|---|---|
| melt viscosity | ISO 11443 | 290 Pa.s | |
| density | ISO 1183 | 1.98 g/cm |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 |
|---|---|---|---|
| Tensile stress | 屈服 | ISO 527-2 | 140 MPa |
| bending strength | 23°C | ISO 178 | 205 Mpa |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.00 kJ/m² |
| Tensile strain | 断裂 | ISO 527-2 | 1.2 % |
| Flexural modulus | 23°C | ISO 178 | 17000 Mpa |
| Charpy Notched Impact Strength | ISO 179/1eA | 4.9 KJ/m | |
| Flexural modulus | ISO 178 | 16600 MPa | |
| elongation at break | 23°C | ISO 527-2 | 1.10 % |
| bending strength | ISO 178 | 205 MPa | |
| tensile strength | 23°C | ISO 527-2 | 140 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 |
|---|---|---|---|
| dielectric constant | 23°C | IEC 60250 | 5.40 1kHz |
| 23°C | IEC 60250 | 5.40 1MHz |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 |
|---|---|---|---|
| Water absorption rate | (23°C,24hr) | ISO 62 | 0.01 % |
| density | ISO 1183 | 1.98 g/cm³ |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6165A7 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa退火，HDT | ISO 75-2/Af | 270 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 2E-05 cm/cm/°C |
| TD | ISO 11359-2 | 3E-05 cm/cm/°C |
Contact Us
Get App
Top