plas
Log In

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DF004PSI-GY7G546 SABIC INNOVATIVE KOREA
LNP™ THERMOTUF™
Plastic bag,Electrical appliances,Medical and nursing supplies
Easy to demould,filler,Glass fiber reinforced ma
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE KOREA/DF004PSI-GY7G546
Hot deformation temperature0.45 MPa, Unannealed, 3.20 mmASTM D648144 °C
1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span5ISO 75-2/Af142 °C
1.8 MPa, Unannealed, 3.20 mmASTM D648139 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE KOREA/DF004PSI-GY7G546
Bending modulus50.0 mm SpanASTM D7905510 Mpa
bending strengthBreak, 50.0 mm SpanASTM D790148 Mpa
elongationBreakASTM D6389.5 %
Tensile modulus--2ASTM D6385510 Mpa
--ISO 527-2/16000 Mpa
tensile strengthBreakASTM D63891.0 Mpa
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE KOREA/DF004PSI-GY7G546
Shrinkage rateFlow : 24hrASTM D9550.20 %
Flow : 24hrISO 294-40.20 %
Across FlowFlow : 24hrASTM D9550.50 %
横向Flow : 24hrISO 294-40.45 %
Water absorption rate24 hr, 50% RHASTM D5700.10 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE KOREA/DF004PSI-GY7G546
Suspended wall beam without notch impact strength23°C5ISO 180/1U61 kJ/m²
23°CASTM D4812960 J/m
injectionTest ConditionTest MethodSABIC INNOVATIVE KOREA/DF004PSI-GY7G546
Back pressure0.200 to 0.300 Mpa
drying temperature120 °C
drying time4.0 hr
Mold temperature80 to 110 °C
Processing (melt) temperature305 to 325 °C
Screw speed30 to 60 rpm
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder320 to 330 °C
Temperature at the rear of the barrel295 to 305 °C
Temperature in the middle of the barrel310 to 320 °C