plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC HF1110-111 SABIC INNOVATIVE SHANGHAI
LEXAN™ 
Electronic and electrical accessories,Automotive components
High mobility,High temperature resistan,transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648126 °C
RTIUL 746130 °C
RTI ElecUL 746130 °C
RTI ImpUL 746130 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
Bending modulus50.0 mm SpanASTM D7902300 Mpa
bending strengthYield, 50.0 mm SpanASTM D79093.0 Mpa
elongationBreakASTM D638120 %
tensile strengthYieldASTM D63862.0 Mpa
BreakASTM D63865.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
Compared to the anti leakage trace indexUL 746PLC 2
High arc combustion indexUL 746PLC 1
High voltage arc tracing rateUL 746PLC 2
Hot wire ignitionUL 746PLC 2
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
melt mass-flow rate300°C/1.2 kgASTM D123825 g/10 min
Shrinkage rate3.20 mm，FlowInternal Method0.50 - 0.70 %
Water absorption rate24 hrASTM D5700.10 %
Equilibrium, 23°CASTM D5700.35 %
Equilibrium, 100°CASTM D5700.58 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
Dart impact23°C, Energy at PeakASTM D376354.0 J
Impact strength of cantilever beam gapASTM D1822378 kJ/m²
flammabilityTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
UL flame retardant rating1.1 mmUL 94V-2
optical performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
transmissivity2540 μmASTM D100388.0 %
turbidity2540 μmASTM D10031.0 %
injectionTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/HF1110-111
Back pressure0.300 to 0.700 Mpa
drying temperature120 °C
drying time3.0 to 4.0 hr
Exhaust hole depth0.025 to 0.076 mm
Mold temperature70 to 95 °C
Processing (melt) temperature270 to 295 °C
Screw speed40 to 70 rpm
Spray nozzle temperature265 to 290 °C
Suggested injection volume40 to 60 %
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder270 to 295 °C
Temperature at the rear of the barrel250 to 270 °C
Temperature in the middle of the barrel260 to 280 °C

Contact Us

Get App

Top