Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA AS-1133 HS NT SOLVAY USA
AMODEL®
Thin walled products、Electrical components、Home appliance components、Automotive Applications、Laptop case、Valves/valve components、Industrial applications、Industrial components、Metal substitution、Lawn and garden equipment、Power/Other Tools、Oil/Gas Supplies、currency、Parts under the hood of a、Application in the automo、Fuel pipeline、Machine/mechanical compon、Vehicle electronics、Shell、Thick wall accessories (c
High temperature resistan、High rigidity、Low temperature resistanc、Filler: Glass fiber reinf、33% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 82 kJ/m² |
| hardness | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 125 |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| Dissipation Factor | 60Hz | ASTM D150 | 5E-03 |
| dielectric constant | 60Hz | ASTM D150 | 4.40 |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.017 |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | V |
| dielectric constant | 1MHz | ASTM D150 | 4.20 |
| dielectric strength | 3.17mm | ASTM D149 | 21 KV/mm |
| arc resistance | ASTM D495 | 140 sec |
| Mechanical properties | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 12200 Mpa | |
| tensile strength | 断裂 | ASTM D638 | 221 Mpa |
| Flexural modulus | ASTM D790 | 10300 Mpa | |
| Tensile modulus | ASTM D638 | 13100 Mpa | |
| elongation | 断裂 | ASTM D638 | 2.5 % |
| bending strength | 屈服 | ASTM D790 | 317 Mpa |
| ISO 178 | 326 Mpa | ||
| Flexural modulus | ISO 178 | 10300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| shear strength | ASTM D732 | 101 Mpa | |
| tensile strength | 屈服 | ISO 527-2 | 225 Mpa |
| Poisson's ratio | 7.58 0.41 | ||
| compressive strength | ASTM D695 | 276 Mpa |
| optical performance | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| transmissivity | 940nm:1.60mm | ASTM D1003 | >30 % |
| 1070nm:1.60mm | ASTM D1003 | >35 % |
| flammability | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.40 % |
| Water absorption rate | 24hr | ASTM D570 | 0.21 % |
| Shrinkage rate | TD | ASTM D955 | 0.80 % |
| Thermal performance | Test Condition | Test Method | SOLVAY USA/AS-1133 HS NT |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 310 °C | |
| Heat distortion temperature | 0.45MPa,退火,3.18mm，HDT | ASTM D648 | 297 °C |
| Linear coefficient of thermal expansion | TD：160to249°C | ASTME831 | 1.3E-04 cm/cm/°C |
| Continuous use temperature | --2 | ASTM D3045 | 164 °C |
| --3 | ASTM D3045 | 185 °C | |
| Linear coefficient of thermal expansion | MD：160to249°C | ASTME831 | 1.4E-05 cm/cm/°C |
| TD：0to100°C | ASTME831 | 5.9E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,退火，HDT | ISO 75-2/Af | 277 °C |
| 1.8MPa,退火,3.18mm，HDT | ASTM D648 | 285 °C | |
| melting temperature | ASTM D3418 | 310 °C | |
| Linear coefficient of thermal expansion | MD：0to100°C | ASTME831 | 2.3E-05 cm/cm/°C |
Contact Us
Get App
Top