plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI HU1110 SABIC INNOVATIVE US
ULTEM™ 
Medical devices,Medical and nursing supplies
Middle flow,Biocompatibility,Steam sterilization
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
Hot deformation temperature1.8MPa,Unannealed,6.40mmASTM D648199 °C
1.8MPa,Unannealed,64.0mmSpanISO 75-2/Af210 °C
Linear coefficient of thermal expansionMD:-40to40°CASTME8315.5E-05 cm/cm/°C
TD:-40to40°CISO 11359-25.5E-05 cm/cm/°C
TD:-40to40°CASTME8315.5E-05 cm/cm/°C
MD:-40to40°CISO 11359-25.5E-05 cm/cm/°C
RTI ElecUL 746170 °C
RTI ImpUL 746170 °C
RTI StrUL 746170 °C
Vicat softening temperatureASTM D152511219 °C
--ISO 306/B120205 °C
--ISO 306/B50200 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
Bending modulus50.0mmSpan5ASTM D7903420 Mpa
ISO 1783300 Mpa
100mmSpan4ASTM D7903720 Mpa
bending strengthYield,50.0mmSpan5ASTM D790174 Mpa
ISO 178140 Mpa
Yield,100mmSpan4ASTM D790165 Mpa
elongationBreakASTM D63870 %
YieldASTM D6387.0 %
Tensile modulusASTM D6383720 Mpa
ISO 527-2/13500 Mpa
Tensile strainBreakISO 527-2/560 %
YieldISO 527-2/56.0 %
tensile strengthYieldASTM D638110 Mpa
YieldISO 527-2/5110 Mpa
BreakASTM D63885.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
Arc resistanceASTM D495PLC 5
Compared to the anti leakage trace indexCTIUL 746PLC 4
High arc combustion indexHAIUL 746PLC 3
High voltage arc tracing rateHVTRUL 746PLC 2
Hot wire ignitionHWIUL 746PLC 1
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
melt mass-flow rate337°C/6.6kgASTM D123816 g/10min
Melt Volume Flow Rate (MVR)360°C/5.0kgISO 113321.0 cm3/10min
Shrinkage rateMD:3.20mmInternal Method0.50-0.70 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.65 %
Saturation,23°CISO 621.2 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
Charpy Notched Impact Strength23°CISO 179/1eA5.0 kJ/m²
Dart impact23°CASTM D302923.0 J
23°C,TotalEnergyASTM D376328.0 J
Impact strength of cantilever beam gap3.20mmASTM D2561900 J/m
-30°CISO 180/1A4.0 kJ/m²
23°CISO 180/1A4.0 kJ/m²
flammabilityTest ConditionTest MethodSABIC INNOVATIVE US/HU1110
UL flame retardant rating0.75mmUL 94V-0
3.0mmUL 945VA
0.71mmUL 94V-2