Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic PF 6510 Hexion Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 16 kJ/m² |
| Supplementary Information | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| Compression molding pressure | >15.0 MPa | ||
| Compression molding temperature | 160to190 °C |
| Mechanical properties | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| compression stress | ISO 604 | 250 MPa | |
| tensile strength | ISO 527-2/5 | 100 MPa | |
| Flexural modulus | ISO 178 | 16000 MPa | |
| Tensile modulus | ISO 527-2/1 | 16000 MPa | |
| bending strength | ISO 178 | 210 MPa |
| Electrical performance | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+12 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 6.00 |
| Dissipation Factor | 100Hz | IEC 60250 | 0.050 |
| dielectric strength | 1.00mm | IEC 60243-1 | 33 kV/mm |
| Surface Resistivity | IEC 60093 | 1E+11 ohms |
| physical property | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| Shrinkage rate | ISO 2577 | 0.050 % | |
| density | 23°C | ISO 1183 | 1.70 g/cm³ |
| Apparent density | ISO 60 | 0.74 g/cm³ | |
| Water absorption rate | ISO 62 | 12.0 mg |
| Thermal performance | Test Condition | Test Method | Hexion Inc./PF 6510 |
|---|---|---|---|
| Heat distortion temperature | 8.0MPa,未退火，HDT | ISO 75-2/C | 175 °C |
Contact Us
Get App
Top