plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK 550GL20 JILIN JOINATURE
ZYPEEK®
Medical supplies,Nursing supplies
Moderate liquidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodJILIN JOINATURE/550GL20
Glass transition temperature起始ISO 11357143 °C
Hot deformation temperature1.8 MpaISO 75-f315 °C
Linear coefficient of thermal expansion低于Tg沿着FlowISO 1135920 ppm/K
高于Tg沿着FlowISO 1135922 ppm/K
Melting temperatureISO 11357343 °C
specific heat23℃DSC1.7 kJ/kg/℃
thermal conductivity23℃ISO 22007-40.3 W/m/K
mechanical propertiesTest ConditionTest MethodJILIN JOINATURE/550GL20
Bending modulus23℃ISO 1788800 Mpa
bending strengthBreak,23℃ISO 178245 Mpa
Shore hardness23℃ISO 86886 D 级
Tensile strainBreak,23℃ISO 5273.3 %
tensile strengthBreak,23℃ISO 527155 Mpa
Electrical performanceTest ConditionTest MethodJILIN JOINATURE/550GL20
Compared to the anti leakage trace indexIEC 60112PLC 4
Dielectric constant23 ℃, 1 kHzIEC 602503.1
Dielectric strength2 mmIEC 60243-124 KV/mm
Dissipation factor23℃, 1MHz,TangentIEC 602500.005
Volume resistivity23 ℃,1VIEC 6009310^16 ohms·cm
Physical propertiesTest ConditionTest MethodJILIN JOINATURE/550GL20
density结晶ISO 11831.43 g/cm³
melt mass-flow rate380℃,5.0kgISO 113311 g/10min
Shrinkage rateMDISO 294-40.8 %
TDISO 294-40.3 %
Water absorption rate23℃,24hr,3.2 mm厚拉伸棒ISO 62-10.05 %
Equilibrium,23℃,3.20 mm厚拉伸棒ISO 62-10.4 %
impact performanceTest ConditionTest MethodJILIN JOINATURE/550GL20
Charpy Notched Impact StrengthISO 179/1eA7 kJ/m²
ISO 179/1U45 kJ/m²
Impact strength of cantilever beam gapISO 180/U60 kJ/m²
有NotchedISO 180-A7.5 kJ/m²