Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM F20-03 MITSUBISHI THAILAND
Iupital™
Thermal stability、wear resistant、High temperature resistan、currency
Thermal stability、wear resistant、High temperature resistan、currency
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/F20-03 |
|---|---|---|---|
| tensile strength | ASTM D638 | 8.89 psi | |
| elongation | 断裂 | ASTM D638 | 60 % |
| Flexural modulus | ASTM D790 | 377 psi | |
| Rockwell hardness | ASTM 785 | 80 | |
| bending strength | ASTM D790 | 13 psi | |
| Suspended wall beam without notch impact strength | ASTM D256 | n/a ft.ib/in | |
| Impact strength of cantilever beam gap | ASTM D256 | 1.2 ft.ib/in |
| Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/F20-03 |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 0.007 | |
| Volume resistivity | ASTM D257 | 1E+14 ohm.cm | |
| dielectric strength | ASTM D149 | 483 v/mil | |
| Surface Resistivity | ASTM D257 | 1E+16 Ohm | |
| dielectric constant | ASTM D150 | 3.7 |
| physical property | Test Condition | Test Method | MITSUBISHI THAILAND/F20-03 |
|---|---|---|---|
| density | ASTM D792 | 1.41 | |
| Shrinkage rate | ASTM D955 | 0.02 in/in | |
| melt mass-flow rate | ASTM D1238 | 9 g/10min |
Contact Us
Get App
Top