Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Kingfa PC-S609 Kingfa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 450 J/m |
| Suspended wall beam without notch impact strength | 23°C,3.20mm | ASTM D256 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 60 % |
| tensile strength | ASTM D638 | 58.0 MPa | |
| Flexural modulus | ASTM D790 | 2300 MPa | |
| bending strength | ASTM D790 | 82.0 MPa |
| Electrical performance | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+15 ohms |
| flammability | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-2 |
| 1.6mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| Shrinkage rate | MD：23°C | ASTM D955 | 0.50to0.70 % |
| density | ASTM D792 | 1.19 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 14 g/10min |
| Thermal performance | Test Condition | Test Method | Kingfa/Kingfa PC-S609 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 125 °C |
| 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 131 °C |
Contact Us
Get App
Top