Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT TV6 260 T DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 11 kJ/m² |
| -30°C | ISO 179/1eA | 10 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
| -30°C | ISO 179/1eU | 70 kJ/m² |
| Electrical performance | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 1 | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 8000 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 100 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 3.5 % |
| flammability | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| Flammability level | 1.5mm | IEC 60695-11-10,-20 | HB |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.15 % |
| density | ISO 1183 | 1.48 g/cm³ |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/TV6 260 T |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 225 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 220 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 200 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 3.5E-05 cm/cm/°C |
| TD | ISO 11359-2 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top