plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT HR5330HF BK503 DUPONT USA
Cristin® 
Electronic and electrical components
Hydrolysis resistance,Filler: Glass fiber reinf,30% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDUPONT USA/HR5330HF BK503
Hot deformation temperature0.45 Mpa,UnannealedISO 75B-1221
0.45MPa,UnannealedISO 75-2/B221 °C
1.8MPa,UnannealedISO 75-2/A207 °C
1.80 Mpa,UnannealedISO 75B-1207
Linear coefficient of thermal expansionMD:--ISO 11359-22E-05 cm/cm/°C
MD:55to160°CISO 11359-21.5E-05 cm/cm/°C
TD:-40to23°CISO 11359-29E-05 cm/cm/°C
MD:-40to23°CISO 11359-22.5E-05 cm/cm/°C
TD:55to160°CISO 11359-21.5E-04 cm/cm/°C
TD:--ISO 11359-21.5E-04 cm/cm/°C
Melting temperatureISO 3146225
ISO 11357-3225 °C
Vicat softening temperatureISO 306/B50215 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/HR5330HF BK503
Bending modulus23℃ISO 1787800 MPa
ISO 1787700 Mpa
bending strengthISO 178200 Mpa
23℃ISO 178203 MPa
Charpy Notched Impact Strength-30 ℃, Type 1, Edgewise, Notch AISO 17911.5 KJ/m
23 ℃, Type 1, Edgewise, Notch AISO 17914.9 KJ/m
elongation23℃,YieldISO 527-13.5 %
Impact strength of cantilever beam gap-40 ℃, Type 1, Notch AISO 18011.1 KJ/m
23 ℃, Type 1, Notch AISO 18016.3 KJ/m
Impact strength of simply supported beam without notch23 ℃, Type 1, EdgewiseISO 17975.1 KJ/m
Poisson's ratioISO 5270.34
Tensile modulusISO 527-28500 Mpa
23℃ISO 527-18500 MPa
Tensile strainBreakISO 527-23.5 %
tensile strengthBreakISO 527-2132 Mpa
Tensile stress23℃,YieldISO 527-1134 MPa
Electrical performanceTest ConditionTest MethodDUPONT USA/HR5330HF BK503
Compared to the anti leakage trace indexIEC 60112PLC 1
Dielectric strength--IEC 60243-144 KV/mm
1.00mm5IEC 60243-131 KV/mm
Dissipation factor1MHzIEC 602500.020
1MHzASTM D1500.020
1kHzASTM D1507E-03
100HzIEC 602502.5E-03
100HzASTM D1502.5E-03
Relative permittivity100HzIEC 602504.40
1MHzIEC 602504.10
Surface resistivityIEC 600931E+13 ohms
Volume resistivityIEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDUPONT USA/HR5330HF BK503
densityISO 11831.50 g/cm³
ISO 11831.5
FlowLength22.00mm,FlowLength350 mm
MediumDensity1.29 g/cm³
Shrinkage rateMDISO 294-40.30 %
TDISO 294-41.0 %
SpecificHeatCapacity of Melt1730 J/kg/°C
StickinessISO 30795.0 cm³/g
ThermalConductivityofMelt0.28 W/m/K
Top out temperature170 °C
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 620.15 %
Saturation,23°C,2.00mmISO 620.35 %
impact performanceTest ConditionTest MethodDUPONT USA/HR5330HF BK503
Charpy Notched Impact Strength23°CISO 179/1eA13 kJ/m²
-30°CISO 179/1eA12 kJ/m²
Impact strength of cantilever beam gap-40°CISO 180/1A11 kJ/m²
23°CISO 180/1A14 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU70 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U65 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/HR5330HF BK503
Burning rate1.00mmISO 379530 mm/min
Extreme Oxygen IndexISO 4589-219 %
Flammability level0.75mmIEC 60695-11-10,-20HB
FMVSS flammabilityFMVSS302B
UL flame retardant rating0.75mmUL 94HB