Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PS BV 307 FR V2 EMAS Plastik San.Tic.AS.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | >6.0 kJ/m² |
| hardness | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 70to80 |
| Mechanical properties | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2500to4000 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >15 % |
| tensile strength | 屈服 | ISO 527-2 | 20.0to40.0 MPa |
| flammability | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-2 | |
| Hot filament ignition temperature | VDE0471/2 | 750 °C |
| physical property | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| Shrinkage rate | 0.40to0.60 % | ||
| melt mass-flow rate | ISO 1133 | 4.0to14 g/10min | |
| density | ISO 1183 | 1.08to1.15 g/cm³ |
| Thermal performance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./BV 307 FR V2 |
|---|---|---|---|
| vicat | ISO 306/B | 100 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 95.0 °C |
| melting temperature | ISO 3146 | 220 °C |
Contact Us
Get App
Top