Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPV Neoplast™ 187 M/E Zylog Plastalloys Pvt. Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Zylog Plastalloys Pvt. Ltd./Neoplast™ 187 M/E |
|---|---|---|---|
| Shore hardness | 邵氏A,5秒,23°C | ASTM D2240 | 90 |
| 邵氏D,5秒,23°C | ASTM D2240 | 25 |
| aging | Test Condition | Test Method | Zylog Plastalloys Pvt. Ltd./Neoplast™ 187 M/E |
|---|---|---|---|
| Change rate of ultimate elongation in air | 150°C,168hr | ASTM D573 | -12 % |
| Change rate of tensile strength in air | 150°C,168hr | ASTM D573 | 10 % |
| Change rate of hardness (Shore) in the air | 150°C,168hr | ASTM D573 | 1.0 |
| physical property | Test Condition | Test Method | Zylog Plastalloys Pvt. Ltd./Neoplast™ 187 M/E |
|---|---|---|---|
| density | ASTM D792 | 0.980 g/cm³ |
| elastomer | Test Condition | Test Method | Zylog Plastalloys Pvt. Ltd./Neoplast™ 187 M/E |
|---|---|---|---|
| elongation | 断裂 | ASTM D412 | 450 % |
| tensile strength | 断裂 | ASTM D412 | 8.83 MPa |
| compression set | 70°C,22hr | ASTM D395B | 60 % |
| tensile strength | 100%应变 | ASTM D412 | 8.34 MPa |
| tear strength | ASTM D624 | 44.1 kN/m |
| Thermal performance | Test Condition | Test Method | Zylog Plastalloys Pvt. Ltd./Neoplast™ 187 M/E |
|---|---|---|---|
| Continuous use temperature | SAEJ2236 | 130 °C | |
| brittle temperature | ASTM D746 | -55.0 °C |
Contact Us
Get App
Top