Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM KB-1006 SABIC INNOVATIVE US
LNP™ STAT-KON™
Casters,Home appliance components
UV resistance,enhance,Filler: Glass beads,30%,Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/KB-1006 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 25 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 4.5 kJ/m² |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/KB-1006 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD：-30to30°C | ASTM D696 | 8.3E-05 cm/cm/°C |
| Heat Deflection Temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 107 °C |
| 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 155 °C | |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 103 °C | |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 8.3E-05 cm/cm/°C |
| Heat Deflection Temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 152 °C |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/KB-1006 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 20 % |
| flexural modulus | 50.0mm跨距 | ASTM D790 | 4000 Mpa |
| tensile strength | 断裂 | ASTM D638 | 34.0 Mpa |
| bending strength | ISO 178 | 65.0 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 20 % |
| bending strength | Break,50.0mmSpan | ASTM D790 | 43.0 Mpa |
| tensile strength | 断裂 | ISO 527-2/5 | 37.0 Mpa |
| flexural modulus | ISO 178 | 4320 Mpa |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/KB-1006 |
|---|---|---|---|
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.20 % |
| shrinkage rate | MD：24小时 | ASTM D955 | 1.0-3.0 % |
| TD：24hr | ASTM D955 | 1.0-3.0 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
Contact Us
Get App
Top