Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+PBT HiFill® PC/PBT IM 5220 UV BK Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 690 J/m |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 130 % |
| tensile strength | ASTM D638 | 52.4 MPa | |
| Flexural modulus | ASTM D790 | 2000 MPa | |
| bending strength | ASTM D790 | 84.1 MPa |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| density | ASTM D792 | 1.21 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.70 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC/PBT IM 5220 UV BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 98.9 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 107 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.3E-05 cm/cm/°C |
Contact Us
Get App
Top