Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Copolymer PROTEQ™ C28T2 澳大利亚凯诺斯
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 60 J/m |
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D256 | 850 J/m |
| hardness | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| Hardness (Shore) | 邵氏D,15秒 | ISO 868 | 64 |
| 邵氏D | ISO 868 | 69 |
| Mechanical properties | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| bending strength | 3.20mm | ASTM D790 | 38.0 MPa |
| elongation | 断裂,3.20mm | ASTM D638 | 100 % |
| tensile strength | 3.20mm | ASTM D638 | 27.0 MPa |
| Flexural modulus | 3.20mm | ASTM D790 | 1800 MPa |
| flammability | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| Burning wire flammability index | 1.6mm | AS/NZS60695.2.12 | 550 °C |
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | ASTM D955 | 1.3 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 35 g/10min |
| density | ASTM D792 | 0.968 g/cm³ |
| Thermal performance | Test Condition | Test Method | 澳大利亚凯诺斯/PROTEQ™ C28T2 |
|---|---|---|---|
| MD | ASTM D696 | 1E-04 cm/cm/°C | |
| Hot deformation temperature (HDT) | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 60.0 °C |
| 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 125 °C |
Contact Us
Get App
Top