Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LNP™ LUBRICOMP™ DCP36 compound SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC/LNP™ LUBRICOMP™ DCP36 compound |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 23 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 91 J/m |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 13.8 J |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 3.90 J | |
| Impact strength of cantilever beam gap | 23°C | ASTM D4812 | 460 J/m |
| 23°C | ISO 180/1A | 8.7 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC/LNP™ LUBRICOMP™ DCP36 compound |
|---|---|---|---|
| Wear factor | Washer | ASTM D3702Modified | 18.0 10^-10in^5-min/ft-lb-hr |
| Flexural modulus | ISO 178 | 13800 MPa | |
| bending strength | ISO 178 | 183 MPa | |
| elongation | 断裂 | ASTM D638 | 1.2 % |
| tensile strength | 断裂 | ISO 527-2/5 | 120 MPa |
| coefficient of friction | Static | ASTM D3702Modified | 0.48 |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 186 MPa |
| tensile strength | 断裂 | ASTM D638 | 111 MPa |
| Tensile modulus | ASTM D638 | 16300 MPa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 1.7 % |
| Wear factor | Ring | ASTM D3702Modified | 0.650 10^-10in^5-min/ft-lb-hr |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 13400 MPa |
| coefficient of friction | Dynamic | ASTM D3702Modified | 0.50 |
| Tensile modulus | ISO 527-2/1 | 15300 MPa | |
| bending strength | 断裂,50.0mm跨距 | ASTM D790 | 185 MPa |
| physical property | Test Condition | Test Method | SABIC/LNP™ LUBRICOMP™ DCP36 compound |
|---|---|---|---|
| Shrinkage rate | MD：24小时 | ASTM D955 | 0.17 % |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.050 % |
| 平衡,23°C,50%RH | ISO 62 | 0.10 % | |
| density | ASTM D792 | 1.39 g/cm³ | |
| Shrinkage rate | TD：24hr | ASTM D955 | 0.30 % |
| Thermal performance | Test Condition | Test Method | SABIC/LNP™ LUBRICOMP™ DCP36 compound |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 145 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 5E-06 cm/cm/°C |
| TD：-30to30°C | ASTM D696 | 3.1E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 140 °C |
| 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 140 °C | |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 137 °C |
Contact Us
Get App
Top