Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LLDPE PE FC 31 D BRASKEM BRAZIL
--
film、General purpose、Laminate、chip
antioxidant、Butene comonomer、General purpose、Narrow molecular weight d
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | BRASKEM BRAZIL/PE FC 31 D |
|---|---|---|---|
| density | ASTM D-792 | 0.919 g/m3 | |
| melt mass-flow rate | 190℃/2.16kg | ASTM D-1238 | 0.75 g/10min |
| Mechanical properties | Test Condition | Test Method | BRASKEM BRAZIL/PE FC 31 D |
|---|---|---|---|
| elongation at break | Compression Molded | ASTM D-638 | 900 % |
| Elmendorf tear strength | 25um，Blown Film，MD | ASTM D-1922 | 100 g |
| tensile strength | 25um，Blown Film，屈服,TD | ASTM D-882 | 11 Mpa |
| elongation at break | 25um，Blown Film，TD | ASTM D-882 | 850 % |
| coefficient of friction | vs. Itself - Dynamic，Blown Film | ASTM D-1894 | 0.11 % |
| tensile strength | 25um，Blown Film，TD,断裂 | ASTM D-882 | 30 Mpa |
| 25um，Blown Film，MD,断裂 | ASTM D-882 | 40 Mpa | |
| elongation at break | 25um，Blown Film，MD | ASTM D-882 | 700 % |
| Dart impact | 25um，Blown Film | ASTM D-1709 | 1.7 g |
| Elmendorf tear strength | 25um，Blown Film，TD | ASTM D-1922 | 400 g |
| tensile strength | Compression Molded，断裂 | ASTM D-638 | 26 Mpa |
| 25um，Blown Film，屈服,MD | ASTM D-882 | 10 Mpa |
| optical performance | Test Condition | Test Method | BRASKEM BRAZIL/PE FC 31 D |
|---|---|---|---|
| gloss | 45°，25um，Blown Film | ASTM D-2457 | 70 °C |
| Haze ratio | 25um，Blown Film | ASTM D-1003 | 40 % |
| processability | Test Condition | Test Method | BRASKEM BRAZIL/PE FC 31 D |
|---|---|---|---|
| Melt Temperature | 200-220 °C |
| Thermal performance | Test Condition | Test Method | BRASKEM BRAZIL/PE FC 31 D |
|---|---|---|---|
| vicat | ASTM D-1525 | 103 °C | |
| brittle temperature | ASTM D-746 | -68 °C |
Contact Us
Get App
Top