Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 K224-LG6 DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-LG6
Charpy Notched Impact Strength23°CISO 179/1eA12 kJ/m²
-30°CISO 179/1eA10 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU85 kJ/m²
-30°CISO 179/1eU70 kJ/m²
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-LG6
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strengthIEC 60243-125 kV/mm
Volume resistivityIEC 600931E+15 ohms·cm
relative permittivity100HzIEC 602503.50
Dissipation Factor100HzIEC 602505E-03
relative permittivity1MHzIEC 602503.30
Surface ResistivityIEC 60093-- ohms
Dissipation Factor1MHzIEC 602500.015
Mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ K224-LG6
Tensile modulusISO 527-29500 MPa
tensile strength 断裂ISO 527-2170 MPa
Tensile strain断裂ISO 527-23.5 %
Flexural modulusISO 1788600 MPa
bending strengthISO 178235 MPa
physical property Test ConditionTest MethodDSM Additive Manufacturing/ K224-LG6
Shrinkage rateTDISO 294-40.90 %
MDISO 294-40.30 %
Water absorption rate平衡,23°C,50%RHISO 621.9 %
饱和,23°CISO 626.3 %
densityISO 11831.35 g/cm³
Thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-LG6
melting temperatureISO 11357-3220 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B220 °C
1.8MPa,未退火，HDTISO 75-2/A210 °C
Linear coefficient of thermal expansionMDISO 11359-22E-05 cm/cm/°C
TDISO 11359-27E-05 cm/cm/°C

Contact Us

Get App

Top