Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 5410GN3-15 MITSUBISHI ENGINEERING JAPAN
NOVADURAN™
Bottle cap,Automotive Applications
Flame retardant,High toughness,High toughness,15%GF
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5410GN3-15 |
---|---|---|---|
Hot deformation temperature | 1.86Mpa | ASTM D648 | 183 °C |
0.45MPa | ASTM D648 | 203 °C | |
Linear coefficient of thermal expansion | 4 | ||
Melting temperature | DSC法 | 220 °C | |
specific heat | 0.3 | ||
UL flame retardant rating | UL 94 | V-0 |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5410GN3-15 |
---|---|---|---|
Bending modulus | ASTM D790 | 5.17 GPa | |
bending strength | ASTM D790 | 132.4 Mpa | |
Friction coefficient | ASTM D1894 | 0.25 | |
Impact strength of cantilever beam gap | 3.2mm | ASTM D256 | 74 J/m |
Rockwell hardness | ASTM D785 | 117 R | |
Stretching length | ASTM D638 | 5 % | |
tensile strength | ASTM D638 | 88.3 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5410GN3-15 |
---|---|---|---|
Arc resistance | ASTM D495 | 95 S | |
Dielectric constant | 10 | ASTM D150 | 29 Pf/m |
Dielectric loss | 10,Tangent | ASTM D150 | 0.017 |
Dielectric strength | ASTM D149 | 24 KV/mm | |
Volume resistivity | ASTM D257 | 10 |
other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5410GN3-15 |
---|---|---|---|
purpose | 注塑增强助燃级.15%玻纤.ul94v-0.作强韧性工程制品。 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5410GN3-15 |
---|---|---|---|
filler content | 15 wt% | ||
Shrinkage rate | Flow | 0.5 % | |
Across Flow | 0.9 % | ||
Water absorption rate | 23℃,24hr | ASTM D570 | 0.09 % |