Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS PC + ABS 750/8 UV CF ALBIS PLASTIC GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 28 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 10 kJ/m² |
| hardness | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| ball-indentation hardness | H358/30 | ISO 2039-1 | 128 MPa |
| Mechanical properties | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 6400 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 85.0 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 2.1 % |
| Flexural modulus | ISO 178 | 5500 MPa | |
| bending strength | ISO 178 | 128 MPa |
| Electrical performance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+09 ohms |
| physical property | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| density | ISO 1183 | 1.15 g/cm³ | |
| Melt volume flow rate | 260°C/5.0kg | ISO 1133 | 10.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC + ABS 750/8 UV CF |
|---|---|---|---|
| vicat | ISO 306/B50 | 126 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 124 °C |
Contact Us
Get App
Top