Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 301-22 SUMITOMO JAPAN
SD POLYCA™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| machinability | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| Dry conditions | 125 | ||
| Mold temperature | 100 °C | ||
| pressure | 2300 Mpa | ||
| Processing temperature | 330 °C |
| thermal performance | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-2 | |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 126 ℃(℉) |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 7 mm/mm.℃ |
| mechanical properties | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 2200 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 89 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 110 % | |
| Elongation at Break | ASTM D638/ISO 527 | 130 % | |
| Tensile modulus | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 62 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| Arc resistance | ASTM D495/IEC 60112 | 300 | |
| Volume resistivity | ASTM D257/IEC 60093 | 3 Ω.cm |
| other | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| characteristic | 超高流动 | ||
| Color | 透明 | ||
| purpose | 手机保护套 |
| Physical properties | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.2 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 22 g/10min | |
| Shrinkage rate | ASTM D955 | 0.5-0.7 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 % |
| optical performance | Test Condition | Test Method | SUMITOMO JAPAN/301-22 |
|---|---|---|---|
| Refractive index | ASTM D542/ISO 489 | 1.585 | |
| Transmittance rate | ASTM D1003/ISO 13468 | 89 % |