plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 R535H BK ASCEND USA

Vydyne®

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	ASCEND USA/R535H BK
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	260 °C
Hot deformation temperature		1.8 MPa, Unannealed	ISO 75-2/A	250 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 55°C	ISO 11359-2	1.1E-4 cm/cm/°C
Linear coefficient of thermal expansion		Flow : 23 to 55°C	ISO 11359-2	2.0E-5 cm/cm/°C
Melting temperature		ISO 11357-3	260 °C
RTI	0.75 mm	UL 746	140 °C
		3.0 mm	UL 746	140 °C
		1.5 mm	UL 746	140 °C
RTI Elec	0.75 mm	UL 746	140 °C
		1.5 mm	UL 746	140 °C
		3.0 mm	UL 746	140 °C
RTI Imp	3.0 mm	UL 746	125 °C
		1.5 mm	UL 746	125 °C
		0.75 mm	UL 746	125 °C

mechanical properties	Test Condition	Test Method	ASCEND USA/R535H BK
Bending modulus	23°C	ISO 178	10500 Mpa
bending strength	23°C	ISO 178	300 Mpa
Poisson's ratio		ISO 527	0.40
Tensile modulus	23°C	ISO 527-2	11600 Mpa
Tensile strain	Break, 23°C	ISO 527-2	3.0 %
tensile strength	Break, 23°C	ISO 527-2	210 Mpa

Electrical performance	Test Condition	Test Method	ASCEND USA/R535H BK
Arc resistance	3.00 mm	ASTM D495	PLC 6
Compared to the anti leakage trace index	3.00 mm	IEC 60112	V
Dielectric strength	1.00 mm	IEC 60243	20 KV/mm
High arc combustion index	1.5 mm	UL 746	PLC 0
		3.0 mm	UL 746	PLC 0
		0.75 mm	UL 746	PLC 0
High voltage arc tracing rate		UL 746	PLC 1
Hot wire ignition	0.75 mm	UL 746	PLC 4
		1.5 mm	UL 746	PLC 3
		3.0 mm	UL 746	PLC 4
Volume resistivity	0.750 mm	IEC 60093	1.0E+13 ohms·cm

Physical properties	Test Condition	Test Method	ASCEND USA/R535H BK
Shrinkage rate	横向Flow : 2.00 mm	ISO 294-4	0.90 %
Shrinkage rate		Flow : 2.00 mm	ISO 294-4	0.40 %
Water absorption rate	24 hr, 23°C	ISO 62	0.80 %
Water absorption rate		Equilibrium, 23°C, 50% RH	ISO 62	1.6 %

impact performance	Test Condition	Test Method	ASCEND USA/R535H BK
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	70 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	80 kJ/m²

flammability	Test Condition	Test Method	ASCEND USA/R535H BK
Burning rate	2.00 mm, 自动灭火	ISO 3795	0.0 mm/min
Burning wire flammability index	0.75 mm	IEC 60695-2-12	700 °C
		3.0 mm	IEC 60695-2-12	875 °C
		1.5 mm	IEC 60695-2-12	700 °C
Hot filament ignition temperature	1.5 mm	IEC 60695-2-13	725 °C
		3.0 mm	IEC 60695-2-13	750 °C
		0.75 mm	IEC 60695-2-13	725 °C
UL flame retardant rating	3.0 mm	UL 94	HB
		0.75 mm	UL 94	HB
		1.5 mm	UL 94	HB

injection	Test Condition	Test Method	ASCEND USA/R535H BK
drying temperature			80 °C
drying time			4.0 hr
Mold temperature			65 to 95 °C
Processing (melt) temperature			285 to 305 °C
Spray nozzle temperature			280 to 310 °C
Suggested maximum material return ratio			25 %
Temperature at the front of the material cylinder			280 to 310 °C
Temperature at the rear of the barrel			280 to 310 °C
Temperature in the middle of the barrel			280 to 310 °C

Contact Us

Get App

Top