Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TSU InnoTooling™ IE-644-03 Innovative Polymers, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermosetting | Test Condition | Test Method | Innovative Polymers, Inc./InnoTooling™ IE-644-03 |
|---|---|---|---|
| Thermosetting components | 脱模时间 | 180to300 min | |
| 硬化法 | 按重量计算的混合比:34按容量计算的混合比:32 | ||
| 树脂 | 按重量计算的混合比:100按容量计算的混合比:100 |
| Uncured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTooling™ IE-644-03 |
|---|---|---|---|
| Viscosity | 固化时间(25°C) | 1.7E+02 hr | |
| 25°C4 | 5.0 Pa·s | ||
| GelTime | 20to30 min | ||
| 25°C2 | 2.4 Pa·s | ||
| 25°C3 | 4.5 Pa·s |
| Cured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTooling™ IE-644-03 |
|---|---|---|---|
| tear strength | ASTM D624 | 30.6 kN/m | |
| elongation | 断裂 | ASTM D638 | 110 % |
| tensile strength | ASTM D638 | 10.3 MPa | |
| Shore hardness | ShoreA | ASTM D2240 | 90to96 |
| physical property | Test Condition | Test Method | Innovative Polymers, Inc./InnoTooling™ IE-644-03 |
|---|---|---|---|
| density | 基体树脂 | 1.11 g/cm³ | |
| Hardener | 1.16 g/cm³ | ||
| Cured | 1.12 g/cm³ | ||
| Shrinkage rate | MD | ASTM D2566 | 0.20 % |
Contact Us
Get App
Top