Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS LUVOCOM® 1200-7116 LEHVOSS Group
--
--
Filler, carbon fiber reinforced material,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1200-7116 |
|---|---|---|---|
| Continuous use temperature | UL 746B | 60.0 °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 96.0 °C |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 4E-05 cm/cm/°C |
| Maximum operating temperature | ShortTerm | 80 °C | |
| thermal conductivity | DIN 52612 | 0.23 W/m/K | |
| Vicat softening temperature | ISO 306/A | 100 °C |
| mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1200-7116 |
|---|---|---|---|
| Bending modulus | ISO 178 | 5000 MPa | |
| Bending strain | ISO 178 | 2.0 % | |
| bending strength | ISO 178 | 105 MPa | |
| Tensile modulus | ISO 527-2 | 6000 MPa | |
| Tensile strain | Yield | ISO 527-2 | 1.5 % |
| tensile strength | Break | ISO 527-2 | 80.0 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1200-7116 |
|---|---|---|---|
| insulation resistance | IEC 60167 | <1.0E+4 ohms | |
| Surface resistivity | IEC 60093 | <1.0E+4 ohms |
| Physical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1200-7116 |
|---|---|---|---|
| density | ISO 1183 | 1.08 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ISO 1133 | 14 g/10min |
| Melt Volume Flow Rate (MVR) | 220°C/10.0kg | ISO 1133 | 14.0 cm³/10min |
| Shrinkage rate | DIN 16901 | 0.20to0.40 % | |
| Water absorption rate | 23°C,24hr | <0.30 % |
| impact performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1200-7116 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 6.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 18 kJ/m² |