plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 1301EP-30 LG CHEM KOREA
LUPOY® 
electrical equipment,Lighting applications
High impact resistance,heat-resisting
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Ball pressure temperatureIEC 60598-1> 125 °C
Hot deformation temperature0.45 MPa, Annealed, 4.00 mmASTM D648139 °C
1.8 MPa, Unannealed, 4.00 mmASTM D648122 °C
1.8 MPa, Annealed, 4.00 mmASTM D648136 °C
Linear coefficient of thermal expansion-40 to 82°C,FlowASTM D6966.8E-5 cm/cm/°C
Vicat softening temperatureASTM D15255144 °C
mechanical propertiesTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Bending modulusASTM D7902410 Mpa
bending strengthASTM D79096.0 Mpa
elongationYieldASTM D6386.0 %
BreakASTM D638150 %
Tensile modulusASTM D6382340 Mpa
tensile strengthBreakASTM D63861.0 Mpa
Yield, 23°C3ASTM D63860.0 Mpa
Electrical performanceTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Compared to the anti leakage trace index2.00 mmIEC 60112 V
Dielectric constant60 HzASTM D1503.00
Dielectric strengthASTM D14917 KV/mm
Dissipation factor60 HzASTM D1501.0E-3
Volume resistivity23°CASTM D2572.0E+17 ohms·cm
Physical propertiesTest ConditionTest MethodLG CHEM KOREA/1301EP-30
melt mass-flow rate300°C/1.2 kgASTM D123830 g/10 min
Shrinkage rateFlowASTM D9550.50 - 0.70 %
Water absorption rate24 hr, 23°CASTM D5700.15 %
Equilibrium, 23°C, 50% RHASTM D5700.32 %
impact performanceTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Suspended wall beam without notch impact strength23°CASTM D256无断裂
flammabilityTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Average degree of combustionASTM D7463 CM
Extreme Oxygen IndexASTM D286326 %
Hot filament ignition temperature2.0 mm, 5.0 secIEC 60695-2-13850 °C
UL flame retardant rating2.5 mmUL 94V-2
3.0 mmUL 94V-2
0.50 mmUL 94V-2
1.6 mmUL 94V-2
optical performanceTest ConditionTest MethodLG CHEM KOREA/1301EP-30
Refractive indexASTM D5421.586
transmissivityASTM D100389.0 %
turbidityASTM D10030.70 to 1.5 %