Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM 3010 ASAHI JAPAN
TENAC™
Electrical field,Electronic field,Engine parts,Industrial applications,Household goods
High impact resistance,high molecular weight,high viscosity
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | ASAHI JAPAN/3010 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Basic Performance | Test Condition | Test Method | ASAHI JAPAN/3010 |
|---|---|---|---|
| density | ASTM D792 | 1.42 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 2.8 g/10 min | |
| 190℃/2.16kg | ISO 1133 | 2.8 g/10 min | |
| Rockwell hardness | M-Scale | ASTM D785 | 94 |
| Shrinkage rate | flow | ASTM D955 | 1.8 - 2.2 % |
| Across flow | ISO 294-4 | 1.8 - 2.2 % | |
| Water absorption rate | 24hr | ASTM D570 | 0.20 % |
| thermal performance | Test Condition | Test Method | ASAHI JAPAN/3010 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 133 °C |
| 0.45MPa,Unannealed | ISO 75-2/B | 163 °C | |
| HDT | ASTM D648/ISO 75 | 133 ℃(℉) | |
| 1.8MPa,Unannealed | ISO 75-2/A | 96.0 °C | |
| 0.45MPa,Unannealed | ASTM D648 | 172 °C | |
| Linear coefficient of thermal expansion | flow | ASTM E831 | 0.00010 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | ASAHI JAPAN/3010 |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 2740 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 98 kg/cm²(MPa)[Lb/in²] | |
| ASTM D790 | 98.0 MPa | ||
| elongation | Break | ASTM D638 | 75 % |
| Impact strength of cantilever beam gap | ASTM D256 | 108 J/m | |
| Rockwell hardness | ASTM D785 | 94 | |
| Taber abraser | 1000次 | ASTM D1044 | 13.0 mg |
| Tensile modulus | ISO 527-2 | 3100 MPa | |
| tensile strength | ASTM D638 | 68.0 MPa | |
| ASTM D638/ISO 527 | 68 kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | ASAHI JAPAN/3010 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.42 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 % |