plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC GV-3430R TEIJIN JAPAN

PANLITE®

machine,Mechanical components,Engineering accessories

High rigidity,Flame retardant

UL

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	151 °C
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	148 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	6E-05 cm/cm/°C
			ASTM D696/ISO 11359	0.2 mm/mm.℃
		MD	ISO 11359-2	2E-05 cm/cm/°C
RTI Elec	1.5mm	UL 746	130 °C
RTI Imp	1.5mm	UL 746	120 °C
RTI Str	1.5mm	UL 746	130 °C
Vicat softening temperature		ASTM D1525/ISO R306	153 ℃（℉）
Vicat softening temperature			ISO 306/B50	153 °C

mechanical properties	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
Bending modulus		ISO 178	7600 Mpa
Bending modulus			ASTM D790/ISO 178	7600 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	155 kg/cm²(MPa)[Lb/in²]
bending strength			ISO 178	155 Mpa
Impact strength of cantilever beam gap		ASTM D256/ISO 179	30 kg·cm/cm(J/M)ft·lb/in
Tensile modulus		ISO 527-2/1	8500 Mpa
Tensile modulus			ASTM D638/ISO 527	8500 kg/cm²(MPa)[Lb/in²]
Tensile strain	Break	ISO 527-2/5	2.0 %
tensile strength	Break	ISO 527-2/5	105 Mpa

Electrical performance	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
Compared to the anti leakage trace index		IEC 60112	PLC 3
Dielectric strength		IEC 60243-1	35 KV/mm
Dissipation factor	1MHz	IEC 60250	9E-03
Dissipation factor		100Hz	IEC 60250	1E-03
Relative permittivity	100Hz	IEC 60250	3.50
Relative permittivity		1MHz	IEC 60250	3.50
Surface resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
density		ASTM D792/ISO 1183	1470
Shrinkage rate		ASTM D955	0.02-0.2 %
		MD:4.00mm	Internal Method	0.020-0.20 %
		TD:4.00mm	Internal Method	0.30-0.50 %
Water absorption rate	23°C,24hr	ISO 62	0.12 %
Water absorption rate			ASTM D570/ISO 62	0.12 %

impact performance	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
Impact strength of simply supported beam without notch		ISO 179	30 kJ/m²

flammability	Test Condition	Test Method	TEIJIN JAPAN/GV-3430R
UL flame retardant rating	0.75mm	UL 94	V-0
		2.5mm	UL 94	5VA
		0.40mm	UL 94	V-2

Contact Us

Get App

Top