Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC HPS6R-1125 SABIC INNOVATIVE CANADA
LEXAN™
medical care、medicine
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE CANADA/HPS6R-1125 |
|---|---|---|---|
| Simple supported beam without notch impact strength 8 | -30°C | ISO179/1eU | NoBreak |
| 23°C | ISO179/1eU | NoBreak | |
| Unscented Izod Impact Strength 9 | 23°C | ISO180/1U | NoBreak |
| Impact strength of simply supported beam gap 8 | 23°C | ISO179/1eA | 75 kJ/m² |
| -30°C | ISO179/1eA | 15 kJ/m² | |
| Dart impact equipped with measuring instruments | 23°C,TotalEnergy | ASTMD3763 | 65.0 J |
| 23°C,EnergyatPeakLoad | ASTMD3763 | 65.0 J | |
| Suspended wall beam gap impact strength 9 | 23°C | ISO180/1A | 70 kJ/m² |
| Unscented Izod Impact Strength 9 | -30°C | ISO180/1U | NoBreak |
| Suspended wall beam gap impact strength 9 | -30°C | ISO180/1A | 10 kJ/m² |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE CANADA/HPS6R-1125 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTMD785 | 118 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE CANADA/HPS6R-1125 |
|---|---|---|---|
| Tensile stress | 屈服 | ISO527-2/50 | 60.0 Mpa |
| elongation | 断裂 | ASTMD638 | 140 % |
| Bending modulus 6 | ISO178 | 2250 Mpa | |
| Tensile strength 4 | Break | ASTMD638 | 68.9 Mpa |
| Flexural Strength5 | Yield,50.0mmSpan | ASTMD790 | 97.9 Mpa |
| Tensile strain | 屈服 | ISO527-2/50 | 6.0 % |
| Tensile modulus 3 | ASTMD638 | 2310 Mpa | |
| Tensile stress | 断裂 | ISO527-2/50 | 75.0 Mpa |
| elongation | 屈服 | ASTMD638 | 6.5 % |
| Tensile modulus | ISO527-2/1 | 2300 Mpa | |
| Bending strength 6,7 | ISO178 | 95.0 Mpa | |
| Tensile strain | 断裂 | ISO527-2/50 | 140 % |
| Flexural modulus | 50.0mmSpan | ASTMD790 | 2340 Mpa |
| Tensile strength 4 | 屈服 | ASTMD638 | 62.1 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE CANADA/HPS6R-1125 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 0.15 % |
| 饱和,23°C | ISO62 | 0.35 % | |
| melt mass-flow rate | 300°C/1.2kg | ASTMD1238 | 7.0 g/10min |
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 6.50 cm3/10min |
| Water absorption rate | 24hr | ASTMD570 | 0.15 % |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.50to0.70 % |
| MD：--2 | 内部方法 | 0.50to0.70 % | |
| melt mass-flow rate | 300°C/5.0kg | ASTMD1238 | 110 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE CANADA/HPS6R-1125 |
|---|---|---|---|
| Hot deformation temperature 10 | 1.8MPa,Unannealed,64.0mmSpan | ISO75-2/Af | 124 °C |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm | ASTMD648 | 135 °C |
| TD：-40到40°C | ISO11359-2 | 6E-05 cm/cm/°C | |
| MD：-40到40°C | ISO11359-2 | 6E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 132 °C |
| 0.45MPa,未退火,6.40mm | ASTMD648 | 138 °C | |
| vicat | -- | ISO306/B50 | 143 °C |
| BallPressure Test | 75°C | IEC60695-10-2 | Pass |
| MD：-40到40°C | ASTME831 | 6.2E-05 cm/cm/°C | |
| vicat | ASTMD152511 | 154 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm | ASTMD648 | 124 °C |
| vicat | -- | ISO306/B120 | 140 °C |
| TD：-40到40°C | ASTME831 | 5.7E-05 cm/cm/°C |
Contact Us
Get App
Top