Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+PMMA (0.350 inch) Aristech Acrylics LLC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| Dart impact | 8.89mm | 内部方法 | 73.2 J |
| Impact strength of cantilever beam gap | 8.89mm | ASTM D256A | 170 J/m |
| hardness | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| Barcol Hardness | 8.89mm | ASTM D2583 | 48to52 |
| Rockwell hardness | M级,8.89mm | ASTM D785 | 90to100 |
| Supplementary Information | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| CyclesFreeze-Thaw | -29到82°C,8.89mm | 内部方法 | NoEffect |
| HotFormingTemperature | ABSSide:8.89mm | 内部方法 | 149to171 °C |
| AcrylicSide:8.89mm | 内部方法 | 177to193 °C |
| Mechanical properties | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| Flexural modulus | 8.89mm4 | ASTM D790 | 2310 MPa |
| 8.89mm5 | ASTM D790 | 2230 MPa | |
| tensile strength | 屈服,8.89mm | ASTM D638 | 42.1 MPa |
| bending strength | 8.89mm4 | ASTM D790 | 61.4 MPa |
| 8.89mm5 | ASTM D790 | 73.8 MPa | |
| Tensile modulus | 8.89mm | ASTM D638 | 2410 MPa |
| elongation | 断裂,8.89mm | ASTM D638 | 6.2 % |
| flammability | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| UL flame retardant rating | 8.9mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| Water absorption rate | 饱和,8.89mm | ASTM D570 | 0.20 % |
| density | ASTM D792 | 1.10 g/cm³ |
| Thermal performance | Test Condition | Test Method | Aristech Acrylics LLC/ (0.350 inch) |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,8.89mm，HDT | ASTM D648 | 89.4 °C |
| Linear coefficient of thermal expansion | MD：8.89mm | ASTM D696 | 7.7E-05 cm/cm/°C |
Contact Us
Get App
Top