Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 ST811HSL NC010 DUPONT JAPAN
Zytel®
Fasteners,rope,Wire and cable,Inner core of hose
Ultra high impact
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DUPONT JAPAN/ST811HSL NC010 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Mechanical properties | Test Condition | Test Method | DUPONT JAPAN/ST811HSL NC010 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 900 Mpa | |
| Flexural modulus | ISO 178 | 850 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 29 % |
| tensile strength | 屈服 | ISO 527-2 | 31.0 Mpa |
| flammability | Test Condition | Test Method | DUPONT JAPAN/ST811HSL NC010 |
|---|---|---|---|
| FMVSS flammability | FMVSS302 | B | |
| burning rate | 1.00mm | ISO 3795 | <100 mm/min |
| physical property | Test Condition | Test Method | DUPONT JAPAN/ST811HSL NC010 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 1.4 % |
| MD | ISO 294-4 | 0.90 % | |
| Ejection Temperature | 190 °C | ||
| Water absorption rate | 平衡,23°C,2.00mm,50%RH | ISO 62 | 2.3 % |
| Thermal performance | Test Condition | Test Method | DUPONT JAPAN/ST811HSL NC010 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 218 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 85.0 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 40.0 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.3E-04 cm/cm/°C |
| TD | ISO 11359-2 | 1.4E-04 cm/cm/°C | |
| Glass Transition Temperature | ISO 11357-2 | 50.0 °C |
Contact Us
Get App
Top