Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEEK 500G CELANESE USA
CELAPEX®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical Property | Test Condition | Test Method | CELANESE USA/500G |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 100000000000000 Ohm-m |
| mechanical properties | Test Condition | Test Method | CELANESE USA/500G |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 4100 Mpa |
| bending strength | 23°C | ISO 178 | 165 Mpa |
| Elongation at Break | 50mm/m | ISO 527-2/1A | 45 % |
| tensile strength | 50mm/m,Yield | ISO 527-2/1A | 100 Mpa |
| Physical properties | Test Condition | Test Method | CELANESE USA/500G |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 10 g/10min | |
| Shrinkage rate | /,Flow | ISO 294-4 | 1 % |
| /,Across Flow | ISO 294-4 | 1 .3 % |
| impact performance | Test Condition | Test Method | CELANESE USA/500G |
|---|---|---|---|
| Charpy Notched Impact Strength | 23℃ (73℉) | ISO 179/1eA | 7 kJ/m² |
| Impact strength of simply supported beam without notch | 23℃ (73℉) | ISO 179/1eU | NB kJ/m² |
| Suspended wall beam without notch impact strength | 23℃ (73℉) | ISO 180/1U | NB kJ/m² |
| 23℃ (73℉) | ISO 180/1A | 7.5 kJ/m² |
| thermal properties | Test Condition | Test Method | CELANESE USA/500G |
|---|---|---|---|
| Glass transition temperature (Tg) | -40°C to | ISO 11357-1/-2 | 143 °C |
| Linear coefficient of thermal expansion | Above Tg,Flow | ISO 11359-2 | 120 E-6 °C |
| Below Tg,Flow | ISO 11359-2 | 45 E-6 °C | |
| Melting temperature | -40°C to | ISO 11357-1/-3 | 343 °C |