Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 7025G30 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Medical Supplies,Home appliance components
Glass fiber reinforced,30%GF
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7025G30 |
|---|---|---|---|
| Stretching length | ASTM D638 | 4 % | |
| Flexural modulus | ASTM D790 | 7.4 GPa | |
| Rockwell hardness | ASTM D785 | 95 M | |
| bending strength | ASTM D790 | 186.3 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256 | 180 J/m | |
| tensile strength | ASTM D638 | 127.5 Mpa |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7025G30 |
|---|---|---|---|
| Dielectric loss | 10，正切 | ASTM D150 | 0.0097 |
| dielectric constant | 10 | ASTM D150 | 29.1 Pf/m |
| dielectric strength | ASTM D149 | 24 KV/mm |
| physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7025G30 |
|---|---|---|---|
| Shrinkage rate | 平行方向 | 0.1 % | |
| Water absorption rate | 23℃,24hrs | ASTM D570 | 0.11 % |
| Shrinkage rate | 垂直方向 | 0.6 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/7025G30 |
|---|---|---|---|
| Heat distortion temperature | 18.6kgf/cm，HDT | ASTM D648 | 148 °C |
| combustibility | UL 94 | V-0 | |
| Heat distortion temperature | 4.6kgf/cm，HDT | ASTM D648 | 152 °C |
| Linear coefficient of thermal expansion | 1.9 |
Contact Us
Get App
Top