Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PEEK 770GL30 JILIN JOINATURE

ZYPEEK®

Aerospace,Electrical field,Electronic field,Electric wire,Cable,Industrial machinery,Medical supplies,Nursing supplies

enhance,Moderate liquidity,standard,Glass fiber reinforced

Plastic Datasheets

thermal performance	Test Condition	Test Method	JILIN JOINATURE/770GL30
Hot deformation temperature	1.8 Mpa	ISO 75-f	328 °C
Linear coefficient of thermal expansion	低于Tg沿着Flow	ISO 11359	18 ppm/K
Linear coefficient of thermal expansion		高于Tg沿着Flow	ISO 11359	18 ppm/K
Melting temperature		ISO 11357	343 °C
specific heat	23℃	DSC	1.7 kJ/kg /℃
Tg (initial)		ISO 11357	143 °C
thermal conductivity	23℃	ISO 22007-4	0.3 W/m/K

mechanical properties	Test Condition	Test Method	JILIN JOINATURE/770GL30
Bending modulus	23℃	ISO 178	11300 Mpa
bending strength	Break，23℃	ISO 178	265 Mpa
compressive strength	23℃	ISO 604	250 Mpa
Shore hardness	23℃	ISO 868	88 D 级
Tensile strain	Break，23℃	ISO 527	2.7 %
tensile strength	Break，23℃	ISO 527	175 Mpa

Electrical performance	Test Condition	Test Method	JILIN JOINATURE/770GL30
Compared to the anti leakage trace index		IEC 60112	PLC 4
Dielectric constant	23 ℃, 1 kHz	IEC 60250	3.2
Dielectric strength	2 mm	IEC 60243-1	25 KV/mm
Dissipation factor	23℃，1 MHz	IEC 60250	0.005
Volume resistivity	23 ℃，1V	IEC 60093	10^16 ohms·cm

Physical properties	Test Condition	Test Method	JILIN JOINATURE/770GL30
density	结晶	ISO 1183	1.51 g/cm³
melt mass-flow rate	380℃，5.0kg	ISO 1133	4.5 g/10min
Shrinkage rate	MD	ISO 294-4	0.8 %
Shrinkage rate		TD	ISO 294-4	0.3 %
Water absorption rate	23℃，24hr，3.2 mm厚拉伸棒	ISO 62-1	0.04 %
Water absorption rate		Equilibrium，23℃	ISO 62-1	0.3 %

impact performance	Test Method	JILIN JOINATURE/770GL30
Charpy Notched Impact Strength	ISO 179-1eA	8 kJ/m²
Impact strength of cantilever beam gap	ISO 180/A	10 kJ/m²
Impact strength of simply supported beam without notch	ISO 179/1U	55 kJ/m²
Suspended wall beam without notch impact strength	ISO 180/U	60 kJ/m²

Get App

Top