Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 GF40-02 CELANESE USA
CELSTRAN®
Electrical components,Electronic and electrical accessories
enhance,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | CELANESE USA/GF40-02 |
---|---|---|---|
filler content | ISO 3451 | 40 % by wt. | |
density | ISO 1183 | 1.45 g/cm | |
Water absorption rate | 24h 23℃ | ISO 62 | 0.55 % by wt. |
Mechanical properties | Test Condition | Test Method | CELANESE USA/GF40-02 |
---|---|---|---|
Charpy Notched Impact Strength | -30℃ | ISO 179 1eA | 30 KJ/m |
elongation at break | 23℃ | ISO 75-2 | 2.8 % |
Tensile modulus | 23℃ | ISO 527 | 10200 Mpa |
Flexural modulus | 23℃ | ISO 178 | 9800 Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179 1eU | 95 KJ/m |
bending strength | 80℃ | ISO 178 | 210 Mpa |
elongation at break | 80℃ | ISO 75-2 | 2.9 % |
tensile strength | 80℃ | ISO 75-2 | 120 Mpa |
Tensile modulus | 80℃ | ISO 527 | 7500 Mpa |
Flexural modulus | 80℃ | ISO 178 | 6800 Mpa |
Corresponding bending strain under bending strength | 80℃ | ISO 178 | 3.7 % |
tensile strength | 23℃ | ISO 75-2 | 170 Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179 1eA | 30 KJ/m |
Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 240 J/m |
bending strength | 23℃ | ISO 178 | 290 Mpa |
Corresponding bending strain under bending strength | 23℃ | ISO 178 | 4.1 % |
Thermal performance | Test Condition | Test Method | CELANESE USA/GF40-02 |
---|---|---|---|
Heat distortion temperature | HDT/A(1.8MPa) | ISO 75 part 1/2 | 255 °C |
HDT/B(8.0MPa) | ISO 75 part 1/2 | 240 °C |
Contact Us
Get App
Top