Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA6 1011G-45 TORAY JAPAN

Amilan®

Automotive sector

High impact resistance, Glass 45% reinforced,High modulus application,High impact

Plastic Datasheets

Other performance	Test Condition	Test Method	TORAY JAPAN/1011G-45
filler content			1.9%水｜- wt%

Basic Performance	Test Condition	Test Method	TORAY JAPAN/1011G-45
Water absorption rate	23℃，24hr	ASTM D-570	1.9%水｜- %

thermal performance	Test Condition	Test Method	TORAY JAPAN/1011G-45
Hot deformation temperature	4.6kg/cm2	ASTM D-648	无水｜225 °C
Linear coefficient of thermal expansion		ASTM D-696	无水｜2-3 ×10-5cm/cm/℃
Melting temperature		差示扫描测热计DSC	225 °C
specific heat			无水｜0.31 Cal/g·℃
UL-94 flame retardant grade	1/32"	UL 94	1.9%水｜-

mechanical properties	Test Condition	Test Method	TORAY JAPAN/1011G-45
Bending modulus	80℃	ASTM D-790	1.9%水｜45000 kg/cm2
		23℃	ASTM D-790	1.9%水｜72000 kg/cm2
		-40℃	ASTM D-790	1.9%水｜120000 kg/cm2
bending strength	23℃	ASTM D-790	1.9%水｜1850 kg/cm2
		-40℃	ASTM D-790	1.9%水｜- kg/cm2
		80℃	ASTM D-790	1.9%水｜- kg/cm2
compressive strength	23℃	ASTM D-695	1.9%水｜- kg/cm2
		-40℃	ASTM D-695	1.9%水｜- kg/cm2
		80℃	ASTM D-695	1.9%水｜- kg/cm2
Elongation at Break	23℃	ASTM D-638	1.9%水｜5 %
Impact strength of cantilever beam gap	-40℃，Unnotched1/8	ASTM D-256	1.9%水｜15 kg·cm/cm2
		23℃，VNotched1/2	ASTM D-256	1.9%水｜20 kg·cm/cm
		-40℃，Unnotched1/8	ASTM D-256	1.9%水｜15 kg·cm/cm
		23℃，Unnotched1/8	ASTM D-256	无水｜98 kg·cm/cm
Rockwell hardness	23℃	ASTM D-785	1.9%水｜- R-标度
Rockwell hardness		23℃	ASTM D-785	1.9%水｜- M-标度
Shear strength	23℃	ASTM D-732	1.9%水｜750 kg/cm2
tensile strength	-40℃，Yield	ASTM D-638	1.9%水｜- kg/cm2
		23℃，Yield	ASTM D-638	1.9%水｜1300 kg/cm2
		80℃，Yield	ASTM D-638	1.9%水｜- kg/cm2

Electrical performance	Test Condition	Test Method	TORAY JAPAN/1011G-45
Arc resistance	1/8"	ASTM D-495	1.9%水｜119 S
Dielectric constant	106Hz	ASTM D-150	无水｜4.2
Dielectric constant		103Hz	ASTM D-150	无水｜4.9
Dielectric strength	1/8"	ASTM D-149	无水｜19 KV/mm
Dissipation factor	50Hz	ASTM D-150	无水｜0.03
Dissipation factor		106Hz	ASTM D-150	1.9%水｜0.06
Volume resistivity		ASTM D-257	1.9%水｜1012 Ω.cm

Physical properties	Test Condition	Test Method	TORAY JAPAN/1011G-45
density		ASTM D-792	1.9%水｜-
Taber abraser	1000g,CS-17	ASTM D-1044	1.9%水｜- mg/1000次

Get App

Top