Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PFA 940HP PLUS CHEMOURS US
TEFLON®
Lining,Pipe fittings,Liquid handling
High purity,Low friction coefficient,Low moisture absorption,Low smoke level,Resistance to stress crac,Electrical performance,Good flexibility,High mobility,Chemical resistance,Weather resistance,Moderate heat resistance,Thermal stability,High toughness,translucent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| critical shear rate | 372°C | 56.0 sec^-1 | |
| MITFoldingEndurance | 200.0µm | ASTM D2176 | 3E+05 cycles |
| hardness | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 55 |
| 邵氏D | ISO 868 | 55 |
| Mechanical properties | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| tensile strength | 23°C | ISO 12086 | 28.0 Mpa |
| Tensile strain | 断裂,23°C | ISO 12086 | 310 % |
| tensile strength | 200°C | ASTM D3307 | 11.0 Mpa |
| Flexural modulus | 200°C | ASTM D790 | 60.0 Mpa |
| 200°C | ISO 178 | 60.0 Mpa | |
| 23°C | ISO 178 | 650 Mpa | |
| elongation | 断裂,23°C | ASTM D3307 | 310 % |
| tensile strength | 23°C | ASTM D3307 | 28.0 Mpa |
| 200°C | ISO 12086 | 11.0 Mpa | |
| Tensile strain | 断裂,200°C | ISO 12086 | 450 % |
| Flexural modulus | 23°C | ASTM D790 | 650 Mpa |
| elongation | 断裂,200°C | ASTM D3307 | 450 % |
| Electrical performance | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+18 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | <2.0E-4 |
| dielectric strength | 0.250mm | IEC 60243-1 | 80 KV/mm |
| Volume resistivity | ISO 1325 | 1E+18 ohms·cm | |
| dielectric constant | 1MHz | ASTM D150 | 2.03 |
| 1MHz | IEC 60250 | 2.03 | |
| dielectric strength | 0.250mm | ASTM D149 | 80 KV/mm |
| Dissipation Factor | 1MHz | IEC 60250 | <2.0E-4 |
| flammability | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Limiting Oxygen Index | ISO 4589-2 | >95 % | |
| ASTM D2863 | >95 % |
| physical property | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | <0.030 % |
| melt mass-flow rate | 372°C/5.0kg | ISO 12086 | 16 g/10min |
| 372°C/5.0kg | ASTM D3307 | 16 g/10min |
| Thermal performance | Test Condition | Test Method | CHEMOURS US/940HP PLUS |
|---|---|---|---|
| melting temperature | ASTM D4591 | 290 °C |
Contact Us
Get App
Top