Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 123R-112 SABIC INNOVATIVE SPAIN
LEXAN™
Industrial applications、Automotive sector、Lawn equipment、Garden equipment、Household goods、chip、Aerospace Applications、Outdoor applications、sporting goods、Window encapsulation、Architectural application、medicine、Electrical field、Electronic field、lens、Medical supplies、Nursing supplies、Electrical appliances、Plastic bag、Lighting applications、Non specific food
Low viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| Suspended wall beam notch impact strength 6 | 23°C | ISO 180/1A | 65 kJ/m² |
| Simply supported beam without notch impact strength 5 | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 | |
| Suspended wall beam notch impact strength 6 | -30°C | ISO 180/1A | 11 kJ/m² |
| -30°C | ISO 180/1U | 无断裂 | |
| 23°C | ISO 180/1U | 无断裂 |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| H 358/30 | ISO 2039-1 | 95.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| Dissipation Factor | 1 MHz | IEC 60250 | 0.010 |
| 1 MHz | IEC 60250 | 2.70 | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Dissipation Factor | 60 Hz | IEC 60250 | 1.0E-3 |
| 50 Hz | IEC 60250 | 1.0E-3 | |
| 50 Hz | IEC 60250 | 2.70 | |
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| dielectric strength | 3.20 mm, 在油中 | IEC 60243-1 | 17 KV/mm |
| 60 Hz | IEC 60250 | 2.70 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2350 Mpa | |
| Tensile stress | 屈服 | ISO 527-2/50 | 63.0 Mpa |
| Bending modulus 3 | ISO 178 | 2300 Mpa | |
| ISO 178 | 90.0 Mpa | ||
| Tensile stress | 断裂 | ISO 527-2/50 | 65.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2/50 | 100 % |
| 1000 Cycles, 1000 g, CS-17 转轮 | 内部方法 | 10.0 mg | |
| Tensile strain | 屈服 | ISO 527-2/50 | 6.0 % |
| optical performance | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| transmissivity | 2540 µm | ASTM D1003 | 88.0 到 90.0 % |
| refractive index | ISO 489 | 1.586 | |
| Haze ratio | 2540 µm | ASTM D1003 | < 0.80 % |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| UL flame retardant rating | 3.0 mm | UL 94 | HB |
| 0.75 mm | UL 94 | HB | |
| Burning wire flammability index | 1.0 mm | IEC 60695-2-12 | 850 °C |
| Limiting Oxygen Index | ISO 4589-2 | 25 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.15 % |
| Outdoor applicability | UL 746C | f1 | |
| Molten Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 21.0 cm3/10min |
| Shrinkage rate - Flow 2 | 内部方法 | 0.50 到 0.70 % | |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.35 % |
| injection | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| Temperature | 80 到 100 °C | ||
| Temperature at the rear of the barrel | 260 到 280 °C | ||
| Processing (melt) temperature | 280 到 300 °C | ||
| drying temperature | 120 °C | ||
| Temperature at the front of the material cylinder | 280 到 300 °C | ||
| drying time | 2.0 到 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Spray nozzle temperature | 270 到 290 °C | ||
| Hopper temperature | 60 到 80 °C | ||
| Temperature in the middle of the barrel | 270 到 290 °C |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SPAIN/123R-112 |
|---|---|---|---|
| thermal conductivity | ISO 8302 | 0.20 W/m/K | |
| vicat | -- | ISO 306/B120 | 141 °C |
| 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距 | ISO 75-2/Ae | 122 °C | |
| Ball Pressure Test | 123 到 127°C | IEC 60695-10-2 | 通过 |
| vicat | -- | ISO 306/B50 | 140 °C |
| 23 到 80°C | ISO 11359-2 | 7.0E-5 cm/cm/°C | |
| RTI Imp | UL 746 | 130 °C | |
| 0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距 | ISO 75-2/Be | 133 °C | |
| RTI | UL 746 | 130 °C | |
| Ball Pressure Test | 140°C 8 | IEC 60695-10-2 | 通过 |
| RTI Elec | UL 746 | 130 °C |
Contact Us
Get App
Top