Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PPO N225X-701 SABIC INNOVATIVE SHANGHAI

NORYL™

medical care

Processability,Chlorine resistance,Bromine free,Flame retardant,Non brominated,Improved processability a,Non chlorinated,Flame retardant,Non brominated,Improved processability a,Non chlorinated,Flame retardant

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/N225X-701
Hot deformation temperature	264 psi, 0.250	ASTM D-648	211 deg F
Hot deformation temperature		66 psi, 0.250", Unannealed	ASTM D-648	229 deg F
Relative Heat Index (RTI)	非机械冲击	UL 746B	95 deg C
		电气	UL 746B	95 deg C
		机械冲击	UL 746B	80 deg C
UL file number			E121562
UL flame retardant rating	测试厚度，5VA	UL 94	0.120 inch
UL flame retardant rating		测试厚度，V-0	UL 94	0.060 inch
Vicat softening temperature		ASTM D-1525	264 deg F

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/N225X-701
Bending modulus	0.25	ASTM D-790	361500 psi
bending strength	Yield点	ASTM D-790	14400 psi
Elongation at Break	类型I, 0.125	ASTM D-638	17.0 %
Instrument control anti impact energy @ peak, -22F		ASTM D-3763	8.6 ft-lbs
Instrument control anti impact energy @ peak, 73F		ASTM D-3763	29.0 ft-lbs
Izod impact value, gap- 22F		ASTM D-256	1.8 ft-lb/in
Izod impact value, reverse gap, 73F		ASTM D 256	16.6 ft-lb/in
Izod impact value, reverse gap- 22F		ASTM D-256	12.0 ft-lb/in
Izod Notched Impact Strength	23℃	ASTM D-256	3.5 ft-lb/in
Tensile elongation, yield, type I 0.125		ASTM D-638	8.0 %
tensile strength	Yield, 类型 I, 0.125	ASTM D-638	9700 psi
tensile strength		Break	ASTM D 638	7200 psi

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/N225X-701
Dielectric constant		ASTM D-150	2.55
Dielectric strength	油中, 125 mils	ASTM D-149	414 v/mil
Dissipation factor	1 MHz	ASTM D-150	0.0070
Dissipation factor		50 Hz	ASTM D-150	0.0100
Surface resistivity		ASTM D-257	>1 E14 ohm/sq
Volume resistivity		ASTM D-257	2E+16 ohm-cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/N225X-701
density		ASTM D-792	1.11
Mold shrinkage, xflow, 0.125		ASTM D-955	5-7 in/in E-3
Shrinkage rate	Flow, 0.125	ASTM D-955	5-7 in/in E-3

Get App

Top