Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPE DV166 ASAHI JAPAN
XYRON™
--
Filler: Filler、60% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 5.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2 | 2.0 % |
| bending strength | 23°C | ISO 178 | 154 Mpa |
| tensile strength | 屈服,23°C | ISO 527-2 | 88.0 Mpa |
| Flexural modulus | 23°C | ISO 178 | 16400 Mpa |
| Electrical performance | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| dielectric constant | 100Hz | IEC 60250 | 4.80 |
| Dissipation Factor | 100Hz | IEC 60250 | 0.021 |
| Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
| dielectric constant | 1MHz | IEC 60250 | 4.20 |
| dielectric strength | 2.00mm | IEC 60243-1 | 40 KV/mm |
| Surface Resistivity | IEC 60093 | 1E+16 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.013 |
| flammability | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| UL flame retardant rating | 2.5mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| Shrinkage rate | 2.00mm | 内部方法 | 0.050-0.20 % |
| Thermal performance | Test Condition | Test Method | ASAHI JAPAN/DV166 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-30到65°C | ISO 11359-2 | 3E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 262 °C |
Contact Us
Get App
Top