Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI AUT230-1000 SABIC INNOVATIVE US
ULTEM™
Electrical appliances、Automotive Applications
High mobility、High transparency、high definition
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/AUT230-1000 |
|---|---|---|---|
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 33.0 J |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 5.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 4.0 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
| Supplementary Information | Test Condition | Test Method | SABIC INNOVATIVE US/AUT230-1000 |
|---|---|---|---|
| Metallic haze | 起始 | 内部方法 | 230 °C |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/AUT230-1000 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3110 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 78.0 Mpa |
| elongation | 屈服 | ASTM D638 | 6.0 % |
| Tensile strain | 屈服 | ISO 527-2/5 | 8.5 % |
| Flexural modulus | 50.0mmSpan | ASTM D790 | 3170 Mpa |
| tensile strength | 屈服 | ISO 527-2/5 | 95.0 Mpa |
| Tensile modulus | ASTM D638 | 3510 Mpa | |
| elongation | 断裂 | ASTM D638 | 25 % |
| tensile strength | Break | ASTM D638 | 96.0 Mpa |
| bending strength | ISO 178 | 123 Mpa | |
| Flexural modulus | ISO 178 | 3080 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 17 % |
| tensile strength | 屈服 | ASTM D638 | 96.0 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/AUT230-1000 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50-0.70 % |
| Melt volume flow rate | 360°C/5.0kg | ISO 1133 | 8.00 cm3/10min |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.50-0.70 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.60 % |
| Shrinkage rate | MD：--2 | 内部方法 | 0.50-0.70 % |
| Water absorption rate | 饱和,23°C | ISO 62 | 1.8 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/AUT230-1000 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 230 °C |
| vicat | -- | ISO 306/B120 | 238 °C |
| Linear coefficient of thermal expansion | TD：23to150°C | ISO 11359-2 | 5E-05 cm/cm/°C |
| vicat | -- | ISO 306/B50 | 242 °C |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 237 °C |
| 1.8MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Af | 228 °C | |
| vicat | ASTM D152510 | 242 °C | |
| Linear coefficient of thermal expansion | MD：-40to150°C | ASTME831 | 5E-05 cm/cm/°C |
| TD：-40to150°C | ASTME831 | 5E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 217 °C |
| Linear coefficient of thermal expansion | MD：23到150°C | ISO 11359-2 | 5E-05 cm/cm/°C |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
Contact Us
Get App
Top