Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPV 201-64 CELANESE USA
Santoprene™
Gears、Automotive Applications、Home appliance components、Electrical components、tubing、Application in the automo、Washer、Consumer product applicat、Parts under the hood of a、Automotive interior equip、packing、Pipe fittings、diaphragm
Creep resistance、Dimensional stability、Ozone resistant、Aging resistance、insulation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
Shore hardness | 邵氏A,15秒,23°C | ISO 868 | 69 |
Electrical performance | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 1 |
dielectric strength | 23°C,2.00mm | ASTM D149 | 30 KV/mm |
dielectric constant | 23°C,1.98mm | ASTMD150 | 2.30 |
High arc combustion index (HAI) | HAI | UL 746 | PLC 0 |
Hot wire ignition (HWI) | HWI | UL 746 | PLC 2 |
Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
High Voltage Arc Traceability Rate (HVTR) | PLC | UL 746 |
flammability | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
UL flame retardant rating | 3.0mm | UL 94 | HB |
1.0mm | UL 94 | HB | |
1.5mm | UL 94 | HB |
physical property | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
Resistance to cleaning agents | UL 749 | f3 | |
ISO 188 | f4 |
elastomer | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
elongation | 断裂,23°C,横向 | ASTMD412 | 450 % |
tensile strength | 断裂,23°C,横向流量 | ASTMD412 | 7.00 Mpa |
tear strength | 23°C3,横向流量 | ASTM D624 | 23.0 kN/m |
compression set | 70°C,22hr6 | ISO 815 | 18 % |
125°C,70hr6 | ISO 815 | 44 % | |
125°C,70hr5 | ASTM D395B | 44 % | |
Tensile stress | 100%应变,23°C,横向流量 | ASTMD412 | 2.60 Mpa |
compression set | 70°C,22hr5 | ASTM D395B | 18 % |
tear strength | 23°C4,横向流量 | ISO 34-1 | 23 kN/m |
aging | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
Change rate of tensile strength in air | 125°C,1000hr,在防冻剂中,50/50V/V/水 | ASTMD471 | -7.0 % |
Change rate of hardness (Shore) in the air | 邵氏A,125°C,70hr,在IRM903油中 | ISO 1817 | -20 |
Change rate of tensile strength in air | 150°C,168hr | ASTMD573 | -12 % |
Change rate of hardness (Shore) in the air | 邵氏A,150°C,168hr | ASTMD573 | 2.0 |
Change rate of ultimate elongation in air | 125°C,70hr,在IRM903油中 | ASTMD471 | -49 % |
mass change fraction | 121°C,168hr,在自动传动液中 | ASTM D471 | 72 % |
Change rate of tensile strength in air | 125°C,168hr,在ASTM#1油中 | ASTMD471 | -21 % |
Change rate of hardness (Shore) in the air | 邵氏A,125°C,168hr,在ASTM#1油中 | ISO 1817 | -14 |
mass change fraction | 125°C,168hr,在ASTM#1油中 | ISO 1817 | 39 % |
121°C,168hr,在自动传动液中 | ISO 1817 | 72 % | |
Change rate of tensile strength in air | 125°C,70hr,在IRM903油中 | ASTMD471 | -30 % |
Change rate of ultimate elongation in air | 125°C,1000hr,在防冻剂中,50/50V/V/水 | ASTMD471 | -21 % |
mass change fraction | 125°C,1000hr,在防冻剂中,50/50V/V/水 | ASTM D471 | 13 % |
Change rate of ultimate elongation in air | 125°C,168hr,在ASTM#1油中 | ASTMD471 | -35 % |
mass change fraction | 125°C,1000hr,在防冻剂中,50/50V/V/水 | ISO 1817 | 13 % |
Maximum continuous use temperature | 1008hr | 自定标准 | 135 °C |
Change rate of hardness (Shore) in the air | 支撐A,125°C,70hr,在IRM903油中 | ASTM D471 | -20 |
Change rate of ultimate elongation in air | 150°C,168hr | ASTMD573 | 6.0 % |
Change rate of hardness (Shore) in the air | 支撐A,125°C,1000hr,在防冻剂中,50/50V/V/水 | ASTM D471 | -4.0 |
支撐A,125°C,168hr,在ASTM#1油中 | ASTM D471 | -14 | |
邵氏A,125°C,1000hr,在防冻剂中,50/50V/V/水 | ISO 1817 | -4.0 | |
volume change | 125°C,70hr,在IRM903油中 | ASTMD471 | 87 % |
mass change fraction | 125°C,168hr,在ASTM#1油中 | ASTM D471 | 39 % |
Thermal performance | Test Condition | Test Method | CELANESE USA/201-64 |
---|---|---|---|
RTI | 3.0mm | UL 746 | 95.0 °C |
brittle temperature | ASTMD746 | -60.0 °C | |
RTI | 1.0mm | UL 746 | 90.0 °C |
RTI Elec | UL 746 | 100 °C | |
RTI | 1.5mm | UL 746 | 90.0 °C |
Contact Us
Get App
Top