Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPEE BT-1172D LG CHEM KOREA
KEYFLEX®
Pipe fittings、Wire and cable applicatio、pipeline、Cable sheath
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| DurometerHardness | ShoreD,23°C,InjectionMolded | ASTM D2240 | 66 |
| Electrical performance | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| Volume resistivity | 23°C | ASTM D257 | >1.0E+11 ohms·cm |
| dielectric strength | 23°C,1.00mm | ASTM D149 | 26 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| tensile strength | Yield,23°C,2.00mm,InjectionMolded | ASTM D638 | 24.5 Mpa |
| elongation | 断裂,23°C,2.00mm,注塑 | ASTM D638 | 600 % |
| Flexural modulus | 23°C,6.40mm,InjectionMolded | ASTM D790 | 441 Mpa |
| tensile strength | 断裂,23°C,2.00mm,注塑 | ASTM D638 | 49.0 Mpa |
| flammability | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm,InjectionMolded | ASTM D955 | 1.5-1.9 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 15 g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.30 % |
| elastomer | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| tear strength | 23°C | ASTM D624 | 165 kN/m |
| Thermal performance | Test Condition | Test Method | LG CHEM KOREA/BT-1172D |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,6.40mm,注塑，HDT | ASTM D648 | 120 °C |
| melting temperature | ASTM D3418 | 217 °C |
Contact Us
Get App
Top