Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA HTNFR52G30NH BK337 DUPONT JAPAN
Zytel®
Electronic communication accessories,Electronic communication accessories
enhance,Glass fiber reinforced,Thermal stability,Flame retardant,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Odor | VDA270 | 3.50 |
thermal performance | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 283 °C |
Linear coefficient of thermal expansion | TD:-40to23°C | ISO 11359-2 | 6E-05 cm/cm/°C |
MD:-- | ISO 11359-2 | 2E-05 cm/cm/°C | |
MD:-40to23°C | ISO 11359-2 | 2E-05 cm/cm/°C | |
MD:55to160°C | ISO 11359-2 | 2E-05 cm/cm/°C | |
TD:-- | ISO 11359-2 | 6E-05 cm/cm/°C | |
TD:55to160°C | ISO 11359-2 | 1E-04 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 310 °C | |
RTI Elec | 0.75mm | UL 746 | 140 °C |
1.5mm | UL 746 | 140 °C | |
3.0mm | UL 746 | 140 °C | |
0.40mm | UL 746 | 140 °C |
mechanical properties | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Bending modulus | ISO 178 | 9000 Mpa | |
bending strength | ISO 178 | 230 Mpa | |
Tensile modulus | ISO 527-2 | 10500 Mpa | |
Tensile strain | Break | ISO 527-2 | 2.2 % |
tensile strength | Break | ISO 527-2 | 150 Mpa |
Electrical performance | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dielectric strength | IEC 60243-1 | 36 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.012 |
100Hz | IEC 60250 | 6.5E-03 | |
Relative permittivity | 100Hz | IEC 60250 | 4.10 |
1MHz | IEC 60250 | 3.90 | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.30 % |
TD | ISO 294-4 | 1.0 % |
impact performance | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 40 kJ/m² |
23°C | ISO 179/1eU | 45 kJ/m² |
flammability | Test Condition | Test Method | DUPONT JAPAN/HTNFR52G30NH BK337 |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-2 | 37 % | |
FMVSS flammability | FMVSS302 | DNI | |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 800 °C |
0.40mm | IEC 60695-2-13 | 700 °C | |
0.75mm | IEC 60695-2-13 | 725 °C | |
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
0.75mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | UL 94 | V-0 |