Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE Generic HDPE - Glass Fiber Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 52to160 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 260to700 J/m |
| hardness | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| Rockwell hardness | 23°C | ASTM D785 | 59to86 |
| Mechanical properties | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| tensile strength | 断裂,23°C | ASTM D638 | 40.8to55.7 MPa |
| bending strength | 23°C | ASTM D790 | 29.0to91.5 MPa |
| tensile strength | 23°C | ASTM D638 | 22.8to59.7 MPa |
| Tensile modulus | 23°C | ASTM D638 | 1860to8280 MPa |
| Flexural modulus | 23°C | ASTM D790 | 1240to4230 MPa |
| elongation | 屈服,23°C | ASTM D638 | 2.8to10 % |
| tensile strength | 屈服,23°C | ASTM D638 | 29.6to75.8 MPa |
| elongation | 断裂,23°C | ASTM D638 | 1.0to9.2 % |
| Electrical performance | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| Volume resistivity | 23°C | ASTM D257 | 9.8E+15到1.0E+16 ohms·cm |
| physical property | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| Shrinkage rate | MD：23°C | ASTM D955 | 0.15to0.50 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.010to0.30 % |
| density | ASTM D792 | 1.01to1.27 g/cm³ |
| Thermal performance | Test Condition | Test Method | Generic/Generic HDPE - Glass Fiber |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 115to122 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 121to130 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 4.8E-5到7.4E-5 cm/cm/°C |
Contact Us
Get App
Top