Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT PLANAC BT-2330 TOYOBO CO., LTD.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 500 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 80 J/m |
| hardness | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 118 |
| Mechanical properties | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0 % |
| tensile strength | ASTM D638 | 105 MPa | |
| compressive strength | ASTM D695 | 130 MPa | |
| Tensile modulus | ASTM D638 | 9700 MPa | |
| Flexural modulus | ASTM D790 | 9000 MPa | |
| bending strength | ASTM D790 | 160 MPa |
| Electrical performance | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.020 |
| dielectric constant | 1MHz | ASTM D150 | 3.30 |
| dielectric strength | 1.60mm | ASTM D149 | 28 kV/mm |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 2 |
| arc resistance | ASTM D495 | 120 sec |
| flammability | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.080 % |
| density | ASTM D792 | 1.78 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 1.0 % |
| Thermal performance | Test Condition | Test Method | TOYOBO CO., LTD./PLANAC BT-2330 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 210 °C |
| Linear coefficient of thermal expansion | MD：-30到100°C | ASTM D696 | 2.7E-05 cm/cm/°C |
Contact Us
Get App
Top